Cisco SCE8000 GBE Installation And Configuration Manual page 60

Preparing for Installation
Table 4-3
Specification
AC-fusing requirements
AC-input frequency rating
Table 4-4
W AC-input power supplies.
Table 4-4
Locale
North America
(locking)
Europe
International
China
Continental
Europe
International
Israel
Japan, North
America
(nonlocking plug)
200–240VAC
operation
Japan, North
America (locking
plug)
200–240VAC
operation
Japan, North
America
100–120VAC
operation1
South Africa
Cisco SCE8000 GBE Installation and Configuration Guide
4-6
Cisco SCE 8000 GBE AC Power Specifications (continued)
lists the AC-input power cord options, specifications, and Cisco product numbers for the 2700
Table 4-4
AC-Input Power Cord Options
Part Number
CAB-GSR16-US(
=)
CAB-GSR16-EU(
=)
CAB-AC16A-90L
-IN(=)
CAB-AC16A-CH
=
CAB-AC-2500W-
EU=
CAB-AC-2500W-I
NT=
CAB-AC-2500W-I
SRL=
CAB-AC-2500W-
US1=
CAB-AC-C6K-T
WLK=
CAB-7513AC=
CAB-7513ACSA= 14 feet (4.3 m)
Chapter 4
Acceptable Range
For North America, the circuit breaker should be rated at
20A.
For everywhere else, the circuit breaker should be sized
according to the input current rating and local or national
code requirements.
50/60 Hz (nominal) (±3% for full range)
also references power cord illustrations.
Length Plug Rating
14 feet (4.3m) 250VAC, 20A
14 feet (4.3m) 250VAC, 16A
14 feet (4.3m) 250VAC, 16A
14 feet (4.3 m) 250VAC, 16A
14 feet (4.3 m) 250VAC, 16A
14 feet (4.3 m) 250VAC, 16A
14 feet (4.3 m) 250VAC, 16A
14 feet (4.3 m) 250VAC, 16A
14 feet (4.3 m) 250VAC, 16A
14 feet (4.3 m) 125VAC, 20A
250VAC, 16A
Installing the Cisco SCE8000 GBE Chassis
Power Cord
Reference
Illustration
Figure 4-1
Figure 4-1
Figure 4-1
Figure 4-2
Figure 4-3
Figure 4-4
Figure 4-5
Figure 4-6
Figure 4-7
Figure 4-8
Figure 4-9
OL-19897-02