Cisco Nexus 7000 Series Configuration Manual page 82

PIM Auto-RP-Candidate Versus Auto-RP-Candidate Election Process
Verification for N7K-1:
show ip pim rp
PIM RP Status Information for VRF "default"
BSR: 192.168.1.1*, next Bootstrap message in: 00:00:52,
priority: 64, hash-length: 30
Auto-RP disabled
BSR RP Candidate policy: None
BSR RP policy: None
Auto-RP Announce policy: None
Auto-RP Discovery policy: None
RP: 192.168.1.1*, (0), uptime: 00:01:57, expires: 00:02:25,
priority: 0, RP-source: 192.168.1.1 (B), group ranges:
224.0.0.0/4
RP: 192.168.2.1, (0), uptime: 02:16:09, expires: never,
priority: 0, RP-source: (local), group ranges:
224.0.0.0/4
show ip pim group 224.1.1.0
PIM Group-Range Configuration for VRF "default"
Group-range
224.0.0.0/4
Verification for N7K-2:
show ip pim rp
PIM RP Status Information for VRF "default"
BSR: 192.168.1.1, uptime: 00:29:47, expires: 00:01:45,
priority: 64, hash-length: 30
Auto-RP disabled
BSR RP Candidate policy: None
BSR RP policy: None
Auto-RP Announce policy: None
Auto-RP Discovery policy: None
RP: 192.168.1.1, (0), uptime: 00:06:59, expires: 00:02:05,
priority: 0, RP-source: 192.168.1.1 (B), group ranges:
224.0.0.0/4
RP: 192.168.2.1*, (0), uptime: 00:13:15, expires: never,
priority: 0, RP-source: (local), group ranges:
224.0.0.0/4
show ip pim group 224.1.1.0
PIM Group-Range Configuration for VRF "default"
Group-range
224.0.0.0/4
PIM Auto-RP-Candidate Versus Auto-RP-Candidate Election Process
The auto-RP-candidate election is similar to the BSR RP-candidate election process, but it does not support
priorities (see the PIM BSR RP-Candidate vs. BSR RP-Candidate Election Process). You cannot configure
the priority for an auto-RP. The default value is 0.
PIM Auto-RP-Candidate Versus Static RP Election Process
The auto-RP-candidate versus static RP election uses the same rules as the election process for the BSR
RP-candidate versus static RP See PIM BSR RP-Candidate vs. Static RP Election Process.
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide
68
Mode RP-address
ASM 192.168.2.1
Mode RP-address
ASM 192.168.2.1
Configuring PIM and PIM6
Shared-tree-only range
-
Shared-tree-only range
-