Cisco Nexus 7000 Series Configuration Manual page 206

Configuring Layer 3 Multicast Using a Mixed Chassis
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide
192
Command or Action
config t
Example:
switch# config t
switch(config)#
hardware proxy layer-3 replication {use |
exclude} {module mod-number | interface
slot/port} [module-type f1]
Example:
switch(config)# hardware proxy layer-3
replication exclude interface ethernet
2/1-16, ethernet 3/1, ethernet 4/1-2
hardware proxy layer-3 replication
rebalance-mode { auto | manual}
Example:
switch(config)# hardware proxy layer-3
replication rebalance-mode auto
hardware proxy layer-3 replication trigger
rebalance
Example:
switch(config)# hardware proxy layer-3
replication trigger rebalance
exit
Example:
switch(config)# exit
switch#
show hardware proxy layer-3 detail
Example:
switch# show hardware proxy layer-3
detail
Configuring Multicast Interoperation with N7K-F132-15 Modules
Purpose
Enters global configuration mode.
Configures specific modules and physical
interfaces on the M-Series module to provide
egress proxy replication of Layer 3 multicast
packets on the N7K-F132-15 module.
Configures the load balancing among the proxy
routing replication interfaces. When you choose
auto, the switch automatically rebalances the
configured VLAN interface multicast
replication traffic load among all the M-Series
replicators. The default value is manual.
In the manual mode, the switch
Note
automatically balances all traffic
among the available proxy routing
interfaces on the M-Series modules
in the chassis when you first start up
the switch.
When you configure manual again in Step 3,
use this command to trigger one-time load
balancing among all the proxy routing multicast
replication interfaces. This command is not
effective if you have configured auto in Step 3.
Note This command is not saved in the
configuration; it is a one-time event.
Exits configuration mode.
(Optional) Displays the information on the
proxy Layer-3 functionality.