Restarting The Pim6 Process - Cisco Nexus 7000 Series Configuration Manual

Restarting the PIM6 Process

Step 4
Step 5
Restarting the PIM6 Process
Before you begin
Ensure that you have installed the Enterprise Services license and enabled PIM6.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide
114
Command or Action
show running-configuration pim
Example:
switch(config)# show
running-configuration pim
copy running-config startup-config
policy-name
Example:
switch(config)# copy running-config
startup-config
Command or Action
restart pim6
Example:
switch# restart pim
config t
Example:
switch# config t
switch(config)#
ipv6 pim flush-routes
Example:
switch(config)# ipv6 pim flush-routes
show running-configuration pim6
Example:
switch(config)# show
running-configuration pim6
copy running-config startup-config
policy-name
Example:
switch(config)# copy running-config
startup-config
Configuring PIM and PIM6
Purpose
(Optional) Displays the PIM
running-configuration information, including
the flush-routes command.
(Optional) Saves configuration changes.
Purpose
Restarts the PIM process.
Enters global configuration mode.
Removes routes when the PIM6 process is
restarted. By default, routes are not flushed.
(Optional) Displays the PIM6
running-configuration information, including
the flush-routes command.
(Optional) Saves configuration changes.