Restarting The Msdp Process - Cisco Nexus 7000 Series Configuration Manual

Restarting the MSDP Process

Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Restarting the MSDP Process
Before you begin
You can restart the MSDP process and optionally flush all routes.
Procedure
Step 1
Step 2
Step 3
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide
168
Command or Action
config t
Example:
switch# config t
switch(config)#
ip msdp mesh-group peer-ip-addr mesh-name
Example:
switch(config)# ip msdp mesh-group
192.168.1.10 my_mesh_1
Repeat Step 2 for each MSDP peer in the mesh
by changing the peer IP address.
show ip msdp mesh-group [mesh-group] [vrf
vrf-name | known-vrf-name | all]
Example:
switch# show ip msdp summary
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Command or Action
restart msdp
Example:
switch# restart msdp
config t
Example:
switch# config t
switch(config)#
ip msdp flush-routes
Example:
Purpose
Enters global configuration mode.
Configures an MSDP mesh with the peer IP
address specified. You can configure multiple
meshes on the same router and multiple peers
per mesh group. By default, no mesh groups
are configured.
—
(Optional) Displays information about the
MDSP mesh group configuration.
(Optional) Saves configuration changes.
Purpose
Restarts the MSDP process.
Enters global configuration mode.
Removes routes when the MSDP process is
restarted. By default, routes are not flushed.
Configuring MSDP