Verifying The Pim And Pim6 Configuration - Cisco Nexus 7000 Series Configuration Manual

Verifying the PIM and PIM6 Configuration

Step 3
Step 4
Step 5
Step 6
Verifying the PIM and PIM6 Configuration
To display the PIM and PIM6 configurations information, perform one of the following tasks. Use the show
ip form of the command for PIM and the show ipv6 form of the command for PIM6.
Command
show ip [v6] mroute {source group | group [source]}
[vrf vrf-name | all]
show ip [v6] pim df [vrf vrf-name | all]
show ip [v6] pim group-range [vrf vrf-name | all]
show ip [v6] pim interface [interface | brief] [vrf
vrf-name | all]
show ip [v6] pim neighbor [vrf vrf-name | all]
show ip [v6] pim oif-list group [source] [vrf vrf-name
| all]
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide
116
Command or Action
switch(config)# interface ethernet 7/40
switch(config-if)#
config tip pim bfd instance
Example:
switch(config-if)# ip pim bfd instance
exit
Example:
switch(config)# exit
show running-configuration pim
Example:
switch(config)# show
running-configuration pim
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Purpose
Enables BFD on the specified interfaces. You
can enable or disable BFD on RIM interfaces
irrespective of whether BFD is enabled on the
VRF.
Exits out of VRF or interface configuration
mode.
(Optional) Displays the PIM
running-configuration information.
(Optional) Saves configuration changes.
Description
Displays the IP or IPv6 multicast routing table.
Displays the designated forwarder (DF) information
for each RP by interface.
Displays the learned or configured group ranges and
modes. For similar information, see also the show ip
pim rp command.
Displays information by the interface.
Displays neighbors by the interface.
Displays all the interfaces in the OIF-list.
Configuring PIM and PIM6