Configuring Msdp Global Parameters - Cisco Nexus 7000 Series Configuration Manual

Configuring MSDP
Step 3
Step 4

Configuring MSDP Global Parameters

You can configure the optional MSDP global parameters described in this table.
Command or Action
Option Description
Enables a route-map
ip msdp
policy for outgoing
sa-policy
SA messages. By
peer-ip-address
default, all
out
policy-name
registered sources
Example:
are sent in SA
messages.
switch(config)# ip
msdp sa-policy
192.168.1.10
my_outgoing_sa_policy
out
Sets a limit on the
ip msdp sa-limit
number of (S, G)
peer-ip-address
entries accepted
out
limit
from the peer. By
Example:
default, there is no
limit.
switch(config)# ip
msdp sa-limit
192.168.1.10 5000
show ip msdp peer [peer-address] [vrf
vrf-name | known-vrf-name | all]
Example:
switch# show ip msdp peer 1.1.1.1
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide
Configuring MSDP Global Parameters
Purpose
(Optional) Displays detailed MDSP peer
information.
(Optional) Saves configuration changes.
165