Standards; Feature History For Igmp Snooping In Cli - Cisco Nexus 7000 Series Configuration Manual

Configuring IGMP Snooping

Standards

Standards

No new or modified standards are supported by this
feature, and support for existing standards has not
been modified by this feature.

Feature History for IGMP Snooping in CLI

Feature Name
ip igmp snooping max-gq-miss
count
IGMP Snooping across VPLS
domains
Configuring lookup mode to MAC
and assigning a static MAC address
vlan configuration vlan-id
Title
—
Releases
6.2(2)
6.2(2)
5.2(1)
5.1(1)
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide
Standards
Feature Information
Command added to allow you to
configure the maximum number of
general query misses permitted.
The IGMP Snooping across VPLS
Domains feature enables snooping
of the IGMP packets on the
pseudowire as well as on the Layer
2 side of the network for optimal
delivery of the multicast packets.
The following command was
introduced:
show ip igmp snooping pw vlan
brief
You can configure IGMP snooping
to use the forwarding lookup mode
as MAC-based, as well as assign a
static MAC address.
Command added to allow you to
configure a VLAN before you
actually create the VLAN.
155