Configuring The Enforce Router Alert Option Check; Restarting The Igmp Process - Cisco Nexus 7000 Series Configuration Manual

Configuring IGMP
Step 6

Configuring the Enforce Router Alert Option Check

You can configure the enforce router alert option check for IGMPv2 and IGMPv3 packets.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5

Restarting the IGMP Process

You can restart the IGMP process and optionally flush all routes.
Command or Action
Device(config)# show ip mroute
copy running-config startup-config
Example:
Device(config)# copy running-config
startup-config
Command or Action
config t
Example:
switch# config t
switch(config)#
ip igmp enforce-router-alert
Example:
switch(config)# ip igmp
enforce-router-alert
no ip igmp enforce-router-alert
Example:
switch(config)# no ip igmp
enforce-router-alert
show running-configuration igmp
Example:
switch(config)# show
running-configuration igmp
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide
Configuring the Enforce Router Alert Option Check
Purpose
(Optional) Saves configuration changes.
Purpose
Enters global configuration mode.
Enables the enforce router alert option check
for IGMPv2 and IGMPv3 packets. By default,
the enforce router alert option check is enabled.
Disables the enforce router alert option check
for IGMPv2 and IGMPv3 packets. By default,
the enforce router alert option check is enabled.
(Optional) Displays the running-configuration
information, including the enforce-router-alert
command line.
(Optional) Saves configuration changes.
33