Configuring MLD
Step 3
Step 4
Verifying the MLD Configuration
To display the MLD configuration information, perform one of the following tasks:
Command
show ipv6 mld interface[interface] [vrf vrf-name | all] [brief]
show ipv6 mld groups [group | interface] [vrf vrf-name | all]
show ipv6 mld route [group | interface] [vrf vrf-name | all]
show ipv6 mld local-groups-
For detailed information about the fields in the output from these commands, see the Cisco Nexus 7000 Series
NX-OS Multicast Routing Command Reference.
Configuration Examples for MLD
The following example shows how to configure MLD:
config t
ipv6 mld ssm-translate FF30::0/16 2001:0DB8:0:ABCD::1
interface ethernet 2/1
Command or Action
show running-configuration ssm-translate
Example:
switch(config)# show
running-configuration ssm-translate
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
ipv6 mld version 2
ipv6 mld join-group FFFE::1
ipv6 mld startup-query-interval 25
Purpose
(Optional) Displays ssm-translate configuration
lines in the running configuration.
(Optional) Saves configuration changes.
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide
Verifying the MLD Configuration
Description
Displays MLD information about
all interfaces or a selected interface,
the default VRF, a selected VRF,
or all VRFs.
Displays the MLD attached group
membership for a group or
interface, the default VRF, a
selected VRF, or all VRFs.
Displays the MLD attached group
membership for a group or
interface, the default VRF, a
selected VRF, or all VRFs.
Displays the MLD local group
membership.
51