Table of Contents
Advertisement
MAN0604_Issue 09_02-2013
2110M8030
APPENDIX B - CERTIFICATION
B.2 cERTiFiEd SEnSOR
The Certified Sensor is designed and approved for use in hazardous areas.
There are six certified sensor types:
Sensor - ECC/Catalytic
•
ATEX
•
UL
•
CSA
Sensor - Thick Film
•
ATEX
•
UL
•
CSA
The UL/CSA Certified Sensor is suitable for connection to an Apex Transmitter Unit or an Apex/
Matrix Junction Box.
Caution: Only cartridges with the following part numbers can be fitted to the Certified
Sensor:
2110B30x0, 31x0, 32x0, 33x0, 34x0, 35x0 series
2110B3700 - 2110B3999 range
Certified Sensor approved to CSA 22.2 No. 152 only when fitted with specific cartridges. See B.5
Control Drawings, CSA (page 126)
A certification label is located on the body of the Certified Sensor. The label contains all the relevant
information regarding the product's identification and certification state.
Special conditions for safe use - ATEX
1. The integral leads shall be protected from impact and suitably terminated.
2. Equipotential bonding is to be provided by the mounting arrangement.
3. The sensor is not to be used in atmospheres containing more than 21% oxygen.
Part No: 2110B2000 or 2110B2070
Part No: 2110B2003 or 2110B2073
Part No: 2110B2004 or 2110B2074
Part No: 2110B2010 or 2110B2010
Part No: 2110B2013 or 2110B2013
Part No: 2110B2014 or 2110B2014
120
Apex
Hide quick links:
Advertisement
Table of Contents
