Accessories; Flow Housing, Weather Protection, Collecting Cone - Honeywell Apex Technical Handbook

MAN0604_Issue 09_02-2013
2110M8030
(4) Select (highlight) the Configuration Menu option.
Use the up/down keys.
(5) Press the ok button.
(6) Enter the current Level 2 password.
The Configuration Menu is displayed.
(7) Select (highlight) the Configure Digital option.
(8) Press the ok button.
Use the up/down keys.
The Configure Digital menu is shown displaying information similar to the following.
For a full explanation of the information see Chapter 4.
(9) Select the Assert Service PIN option.
(10) Press the ok button.
This binds the node to the network.
The display automatically returns to the Configuration Menu.
(11) Press the esc button twice
This returns to the Gas Reading display via the Main Menu.

3.4 ACCESSORIES

All the accessories except for the Sunshade and filter are fitted to the Certified Sensor in the
same way.
To fit a filter see the filter replacement instructions given in Chapter 5.
For the dimensions of the accessories see Chapter 2.

3.4.1 Flow Housing, Weather Protection, Collecting Cone

To fit the Flow Housing, Weather Protection, Collecting Cone accessories carry out the following
procedure.
(1) Remove the Certified Sensor cap.
3. inSTAllATiOn
Configuration Menu
Change Cartridge
Configure 4-20mA
Configure Relays
Configure Alarms
Configure Digital
Select Language
Configure Backlight
Configure Digital
Network Type:
Connection Type:
Node Id:
Node Address:
Baud Rate:
Node S/W Ver:
Assert Service PIN
45
LonWorks
FTT-10
00A176094600
N/A
78.0kbit/s
1.0
Apex