Table of Contents
Advertisement
MAN0604_Issue 09_02-2013
2110M8030
(9)
Enter the new password .
The following screen is displayed:
(10) Enter the new password again .
The following screen is displayed:
(11)
Press ok.
The display returns to the Change Passwords Menu.
Follow the procedure to set/change another password or press esc to return to the
Main Menu.
Note: If the wrong password is entered at the prompt during step 10 the following screen is
displayed:
Level 1 Password
Failure!
4.3.2 Password reset
The Reset Passwords option allows the system administrator to reset all the passwords back to the
default password supplied when the unit is first delivered, i.e.
down). This provides initial access to all of the menus.
To reset the access passwords to the default value carry out the following procedure:
(1)
Power-up the system.
Wait for the Gas Reading display to stabilise.
(2)
Press the esc button.
4. OPERATION
Level 1 Password
ReEnter New Password
Level 1 Password
Success!
(1)
Press ok.
OK:Continue
The display returns to the Change
Passwords Menu.
(2)
Repeat the procedure re-entering the
correct password.
OK:Continue
54
Apex
(ok, up, down and
Hide quick links:
Advertisement
Table of Contents
