Display Menu - Honeywell Apex Technical Handbook

MAN0604_Issue 09_02-2013
2110M8030

4.4.3 Display Menu

Display Menu
Reset Alarms, Faults
Calibration Info
Current Config
The Display Menu reports back the current settings for the Transmitter Unit and Certified Sensor,
e.g. calibration and configuration setting information.
This menu is protected by a Level 1 password.
Reset Alarms, Faults
!
Alarms should not be reset until it is confirmed that
gas is not present.
This option displays a screen that reports the state of each of the Transmitter Unit alarms. These are
Fault Relay, Alarm1 Relay, Alarm2 Relay and Overrange. Each of these can be Active or Inactive.
It also allows latched alarms and overrange to be reset provided that the conditions responsible for
causing them are no longer present.
Reset Alarms, Faults
ok
Reset Alarms screen
Choose Reset
Alarms
ok
Alarms reset
Display Menu
4. OPERATION
WARNING
Use up/down
buttons
71
Display Menu
Note: Alarms are not reset until the esc
button is pressed to leave the Display
Menu and return to the Main Menu.
Apex