Xconfiguration Cameras Speakertrack Trackingmode; Xconfiguration Cameras Speakertrack Connectordetection Mode; Xconfiguration Cameras Speakertrack Connectordetection Cameraleft; Xconfiguration Cameras Speakertrack Connectordetection Cameraright - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xConfiguration Cameras SpeakerTrack TrackingMode

This setting applies only to systems with a dual camera (speaker tracking), and when Cameras
SpeakerTrack Mode is set to Auto.
The speaker tracking algorithm can react to changes in two modes, one faster than the other.
The mode determines when the camera view will change to a new speaker.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
USAGE:
xConfiguration Cameras SpeakerTrack TrackingMode:
where
TrackingMode
: Auto/Conservative
Auto: Normal tracking mode.
Conservative: The camera view will change to a new speaker later than in Normal mode.

xConfiguration Cameras SpeakerTrack ConnectorDetection Mode

Not applicable in this version.
USAGE:
xConfiguration Cameras SpeakerTrack ConnectorDetection Mode:
where

xConfiguration Cameras SpeakerTrack ConnectorDetection CameraLeft

Not applicable in this version.
USAGE:
xConfiguration Cameras SpeakerTrack ConnectorDetection CameraLeft:
where

xConfiguration Cameras SpeakerTrack ConnectorDetection CameraRight

Not applicable in this version.
USAGE:
xConfiguration Cameras SpeakerTrack ConnectorDetection CameraRight:
where
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xConfiguration
TrackingMode
Mode
xCommand

xConfiguration Cameras SpeakerTrack Whiteboard Mode

This setting applies only to systems with dual cameras.
The Snap to Whiteboard feature extends the speaker tracking functionality, thus you need a
camera that supports speaker tracking. When a presenter is standing next to the whiteboard,
the camera will capture both the presenter and the whiteboard if the Snap to Whiteboard
feature is enabled. If the feature is disabled, only the presenter will be captured. The Snap to
Whiteboard feature is set up from the Touch controller or web interface.
Requires user role: ADMIN, INTEGRATOR, USER
Default value: Off
USAGE:
xConfiguration Cameras SpeakerTrack Whiteboard Mode:
where
Mode
: Off/On
Off: The Snap to Whiteboard feature is disabled.
On: The Snap to Whiteboard feature is enabled.
CameraLeft
CameraRight
56
API Reference Guide
xStatus Appendices
Mode
Copyright © 2017 Cisco Systems, Inc. All rights reserved.