Systemunit Commands; Xcommand Systemunit Boot; Xcommand Systemunit Factoryreset - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

SystemUnit commands

xCommand SystemUnit Boot

Reboot the system.
Requires user role: ADMIN, INTEGRATOR, USER
USAGE:
xCommand SystemUnit Boot [Action: Action]
where
Action: Restart/Shutdown
As a default the system restarts after a reboot. By selecting Shutdown, the system will
not restart. The default value is Restart.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand xCommand

xCommand SystemUnit FactoryReset

Reset the codec to factory default settings. The call logs are deleted and all system parameters
are reset to default values. All files that have been uploaded to the codec are deleted. Option
key(s) are not affected.
As a default the system restarts after the factory reset, but other behaviour can be forced by
selecting a different TrailingAction.
Requires user role: ADMIN, USER
USAGE:
xCommand SystemUnit FactoryReset Confirm:
TrailingAction]
where
Confirm: Yes
Include to confirm your choice.
Keep: Certificates/LocalSetup/Network/Provisioning/SerialPort/Spark
Select which configurations to keep when you factory reset the system. You can have
up to 6 CallId parameters in the same command.
LocalSetup:
xConfiguration Audio DefaultVolume
xConfiguration Audio SoundsAndAlerts RingVolume
xConfiguration Time Zone
xConfiguration UserInterface Language
xConfiguration Video Output Connector OverscanLevel
xCommand Camera Preset Store
Network:
xConfiguration Network 1
xConfiguration NetworkServices Wifi Allowed
xConfiguration NetworkServices Wifi Enabled
Spark:
xConfiguration Spark ServiceOverrides GdsBaseUrl
xConfiguration Spark ServiceOverrides U2CBaseUrl
xConfiguration Spark ServiceOverrides WdmBaseUrl
152
API Reference Guide
xStatus Appendices
Confirm [Keep: Keep] [TrailingAction:
Copyright © 2017 Cisco Systems, Inc. All rights reserved.