Cisco TelePresence MX700 and MX800
Introduction
xStatus Provisioning Status
Shows the status of the provisioning.
Failed: The provisioning failed.
AuthenticationFailed: The authentication failed.
Provisioned: The endpoint is provisioned.
Idle: The provisioning is not active.
NeedConfig: The endpoint needs to be configured.
ConfigError: An error occurred during configuration.
Requires user role: ADMIN, USER
Value space of the result returned:
Failed/AuthenticationFailed/Provisioned/Idle/NeedConfig/ConfigError
Example:
xStatus Provisioning Status
*s Provisioning Status: Provisioned
** end
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API
xConfiguration
xCommand
Proximity status
xStatus Proximity Services Availability
Shows whether proximity services are available on the endpoint.
Available: Proximity mode has been enabled with the command xConfiguration Proximity Mode
and one or more of the proximity services have been enabled with xConfiguration Proximity
Services commands.
Disabled: Proximity mode has been disabled with xConfiguration Proximity Mode, or none of the
services have been enabled with the xConfiguration Proximity Services commands.
Deactivated: Proximity services have been deactivated with the command xCommand Proximity
Services Deactivate.
Requires user role: ADMIN, USER
Example:
xStatus Proximity Services Availability
*s Proximity Services Availability: Disabled
** end
213
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.