Xstatus Audio Output Remoteoutput [N] Input [N] Gain; Xstatus Audio Volume; Xstatus Audio Volumemute; Bookings Status - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xStatus Audio Output RemoteOutput [n] Input [n] Gain

Shows the gain (dB) on the input, when input is connected to the remote output. Range from
-54 dB to 15 dB, where -54 dB equals Off.
You can run the command xStatus Audio Output RemoteOutput to find the identity [n] of the
output and input.
Requires user role: ADMIN, USER
Value space of the result returned:
-54..15
Example:
xStatus Audio Output RemoteOutput 9 Input 1 Gain
*s Audio Output RemoteOutput 9 Input 1 Gain: 0
** end

xStatus Audio Volume

Shows the volume level (dB) of the loudspeaker output.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
0..100
Example:
xStatus Audio Volume
*s Audio Volume: 70
** end

xStatus Audio VolumeMute

Shows whether the endpoint volume is set to mute.
Requires user role: ADMIN, USER
Value space of the result returned:
Off/On
Example:
xStatus Audio VolumeMute
*s Audio VolumeMute: Off
** end
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand

Bookings status

xStatus Bookings Current Id

The ID of the on going booking event, if any.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Bookings Current Id
*s Bookings Current Id: "123"
** end
182
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.