Roompreset Commands; Xcommand Roompreset Activate; Xcommand Roompreset Clear; Xcommand Roompreset Store - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

RoomPreset commands

xCommand RoomPreset Activate

Activate one of the locally stored presets.
Note that information about all video input sources, and pan, tilt, zoom and focus values for
all cameras are included in the same preset. In contrast, the xCommand Camera Preset
commands applies to individual cameras only.
Requires user role: ADMIN, USER
USAGE:
xCommand RoomPreset Activate PresetId:
where
PresetId: Integer (1..15)
The ID of the preset you want to activate.

xCommand RoomPreset Clear

Delete a preset.
Note that information about all video input sources, and pan, tilt, zoom and focus values for
all cameras are included in the same preset. In contrast, the xCommand Camera Preset
commands applies to individual cameras only.
Requires user role: ADMIN, USER
USAGE:
xCommand RoomPreset Clear PresetId:
where
PresetId: Integer (1..15)
The ID of the preset you want to delete.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration
PresetId
PresetId
xCommand xCommand

xCommand RoomPreset Store

Store the connector selections for all video input sources and the current position (pan and tilt),
zoom and focus values for all cameras.
Note that information about all video input sources, and pan, tilt, zoom and focus values for
all cameras are included in the same preset. The system may hold 15 such predefined video
input presets. These presets are available for far end control, i.e. they are referred in the
PresetId parameter of the xCommand FarEndControl Preset Activate command. In contrast, the
xCommand Camera Preset commands applies to individual cameras only. Those presets are
not available for far end control.
Requires user role: ADMIN, USER
USAGE:
xCommand RoomPreset Store [Description: "Description"] PresetId:
Type
where
Description: String (0, 255)
Enter a description of the camera preset.
PresetId: Integer (1..15)
The ID of this preset.
Type: All/Camera
Not applicable. If you want to ensure that a preset only affects camera positions we
recommend that you select Camera.
147
API Reference Guide
xStatus Appendices
PresetId
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
Type: