Xstatus Video Input Connector [N] Signalstate; Xstatus Video Input Connector [N] Sourceid; Xstatus Video Input Connector [N] Type; Xstatus Video Input Mainvideosource - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xStatus Video Input Connector [n] SignalState

Shows the signal state for the specified input.
Unknown: The signal format is unknown.
OK: A signal is detected and the signal format is supported.
Unsupported: A signal is detected, but the signal format is not supported.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
OK/Unknown/Unsupported
Example:
xStatus Video Input Connector 1 SignalState
*s Video Input Connector 1 SignalState: OK
** end

xStatus Video Input Connector [n] SourceId

Shows the identifer of the input source that the connector is associated with.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Integer
Example:
xStatus Video Input Connector 1 SourceId
*s Video Input Connector 1 SourceId: 1
** end

xStatus Video Input Connector [n] Type

Shows which connector type it is.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Composite/DVI/HDMI/Unknown/YC
Example:
xStatus Video Input Connector 1 Type
*s Video Input Connector 1 Type: HDMI
** end
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand

xStatus Video Input MainVideoSource

Returns the local video input currently used as the main source. The value Composed is
returned if the main source is composed of more than one local input. The default main video
source is set with the xConfiguration Video DefaultMainSource command. It can be changed
using xCommand Video Input SetMainVideoSource.
Requires user role: ADMIN, USER
Value space of the result returned:
Literal (1 / 2 / 3 / 4 / Composed )
Example:
xStatus Video Input MainVideoSource
*s Video Input MainVideoSource: 1
** end

xStatus Video Input Source [n] ConnectorId

Shows the identifier of the connector that is associated with the input source.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Integer
Example:
xStatus Video Input Source 1 ConnectorId
*s Video Input Source 1 ConnectorId: 1
** end

xStatus Video Input Source [n] FormatStatus

Shows the resolution format status for the video input source.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Ok/OutOfRange/NotFound/Interlaced/Error/Unknown
Example:
xStatus Video Input Source 1 FormatStatus
*s Video Input Source 1 Resolution FormatStatus: Ok
** end
226
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.