Cisco TelePresence MX700 and MX800
Introduction
xConfiguration Audio Input HDMI [n] Mode
This setting applies to HDMI [2..3] for single camera systems, and to HDMI [3] for dual camera
systems.
The HDMI inputs have two audio channels. Define if the audio channels on the HDMI input shall
be enabled.
Requires user role: ADMIN, INTEGRATOR
Default value: On
USAGE:
xConfiguration Audio Input HDMI
where
n
: Unique ID that identifies the HDMI input. Range: 2..3 for single camera systems; 3..3 for
dual camera systems
Mode
: Off/On
Off: Disable audio on the HDMI input.
On: Enable audio on the HDMI input.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API
xConfiguration
xConfiguration
n
Mode:
Mode
xCommand
xConfiguration Audio Input HDMI [n] VideoAssociation MuteOnInactiveVideo
This setting applies to HDMI [2..3] for single camera systems, and to HDMI [3] for dual camera
systems.
Determine whether to play audio only when you present the HDMI input source, or to always
play audio when an audio source is connected to the HDMI input.
Requires user role: ADMIN, INTEGRATOR
Default value: On
USAGE:
xConfiguration Audio Input HDMI
MuteOnInactiveVideo
where
n
: Unique ID that identifies the HDMI input. Range: 2..3 for single camera systems; 3..3 for
dual camera systems
MuteOnInactiveVideo
: Off/On
Off: Audio is always played, locally and to far end; you do not have to present the HDMI
input source.
On: Audio is played, locally and to far end, only when you present the HDMI input
source.
xConfiguration Audio Input Line [1..4] Equalizer ID
Select the equalizer ID of the audio source that is connected to the line input.
Requires user role: ADMIN, INTEGRATOR
Default value: 1
USAGE:
xConfiguration Audio Input Line
where
n
: Unique ID that identifies the audio line input. Range: 1..4
ID
: Integer (1..8)
Set the equalizer ID.
45
API Reference Guide
xStatus
Appendices
n
VideoAssociation MuteOnInactiveVideo:
n
Equalizer ID:
ID
Copyright © 2017 Cisco Systems, Inc. All rights reserved.