Xconfiguration Audio Input Line [1 - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction
xConfiguration Audio Input Line [1..4] Equalizer Mode
Define the equalizer mode for the audio source that is connected to the line input.
Requires user role: ADMIN, INTEGRATOR
Default value: Off
USAGE:
xConfiguration Audio Input Line
where
n
: Unique ID that identifies the audio line input. Range: 1..4
Mode
: Off/On
Off: No equalizer.
On: Enable the equalizer for the audio source that is connected to the line input.
xConfiguration Audio Input Line [1..4] VideoAssociation MuteOnInactiveVideo
The audio source can be associated with a video source on the video input connector, and
you can determine whether to play or mute audio depending on whether the video source is
presented or not.
Requires user role: ADMIN, INTEGRATOR
Default value: Line [1, 2]: On Line[3, 4]: Off
USAGE:
xConfiguration Audio Input Line
MuteOnInactiveVideo
where
n
: Unique ID that identifies the audio line input. Range: 1..4
MuteOnInactiveVideo
: Off/On
Off: The audio source is not associated with a video source. The audio will be played
locally and to far end regardless of whether the video source is presented.
On: The audio source is associated with a video source. The audio will be played
(locally and to far end) when the associated video source is presented. The audio will
be muted when the video source is not presented.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xConfiguration
n Equalizer Mode: Mode
VideoAssociation MuteOnInactiveVideo:
n
xCommand
xConfiguration Audio Input Line [1..4] VideoAssociation VideoInputSource
The audio source can be associated with a video source on the video input connector.
Requires user role: ADMIN, INTEGRATOR
Default value: Line [1, 2]: 4 Line[3, 4]: 1
USAGE:
xConfiguration Audio Input Line
VideoInputSource
where
n
: Unique ID that identifies the audio line input. Range: 1..4
VideoInputSource
: 1/2/3/4/5
Select the video input connector to associate the audio source with.
xConfiguration Audio Input Line [1..4] Channel
Define whether the audio source on the line input is a mono signal or part of a multichannel
signal.
Requires user role: ADMIN, INTEGRATOR
Default value: Left
USAGE:
xConfiguration Audio Input Line
where
n
: Unique ID that identifies the audio line input. Range: 1..4
Channel
: Left/Mono/Right
Left: The Audio Line input signal is the left channel of a stereo signal.
Mono: The Audio Line input signal is a mono signal.
Right: The Audio Line input signal is the right channel of a stereo signal.
46
API Reference Guide
xStatus Appendices
n VideoAssociation VideoInputSource:
n Channel: Channel
Copyright © 2017 Cisco Systems, Inc. All rights reserved.