Xcommand Usermanagement User Add; Xcommand Usermanagement User Delete; Xcommand Usermanagement User Get - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xCommand UserManagement User Add

Adds a new user to this device.
Requires user role: ADMIN
USAGE:
xCommand UserManagement User Add [Active: Active] [ClientCertificateDN:
"ClientCertificateDN"] [Passphrase: "Passphrase"] [PassphraseChangeRequired:
PassphraseChangeRequired] [PinChangeRequired: PinChangeRequired] [Role: Role]
[ShellLogin: ShellLogin] Username: "Username" [YourPassphrase: "YourPassphrase"]
where
Active: Literal (False / True)
Specifies whether this is an active user or not.
ClientCertificateDN: String (0..255)
Identifies a user who logs in with a client certificate instead of a username and
password.
Passphrase: String (0..255)
Specifies a Passphrase for the user.
PassphraseChangeRequired: Literal (False / True)
Specifies whether the user's passphrase requires changing or not.
PinChangeRequired: Literal (False / True)
Specifies whether a user's PIN requires changing or not.
Role: Literal (Admin / Audit / Integrator / RoomControl / User )
Sets the user's role.
ShellLogin: Literal (False / True)
Specifies whether the user should have a shell login or not.
Username: String (0..127)
Specifies the user's username.
YourPassphrase: String (0..255)
The user's passphrase.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand xCommand

xCommand UserManagement User Delete

Deletes a user from this device.
Requires user role: ADMIN
USAGE:
xCommand UserManagement User Delete Username: "Username" [YourPassphrase:
"YourPassphrase"]
where
Username: String (0..127)
Specifies the username of the user that is deleted.
YourPassphrase: String (0..255)
The passphrase of the user that is deleted.

xCommand UserManagement User Get

Shows the details of users on this device.
Requires user role: ADMIN
USAGE:
xCommand UserManagement User Get [ClientCertificateDN: "ClientCertificateDN"]
[Username: "Username"]
where
ClientCertificateDN: String (0..255)
Identifies a user who logs in with a client certificate instead of a username and
password.
Username: String (0..127)
Specify a username to show the details of a particular user.
163
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.