Cisco TelePresence MX700 and MX800
Introduction
Dial commands
xCommand Dial
Dial out from the system. Returns information about the CallId and ConferenceId, which are
required for some of the other commands.
Requires user role: ADMIN, INTEGRATOR, USER
USAGE:
xCommand Dial Number: "Number" [Protocol: Protocol] [CallRate: CallRate]
[CallType: CallType] [BookingId: "BookingId"] [Appearance: Appearance]
[DisplayName: "DisplayName"]
where
Number: String (0, 255)
Enter the number or address.
Protocol: H320/H323/Sip/Spark
Select the call protocol.
CallRate: Integer (64..6000)
Set the call rate.
CallType: Audio/Video
Select the call type.
BookingId: String (0, 255)
Any identifier that an external booking system (e.g. TMS, CTS-MAN) can use for its
own references to match placed calls with the booking systems internal identifier for a
meeting. This can be any string, e.g. a GUID. The booking Id is supplied in call logs, call
events etc for the call.
Appearance: Integer (1..999999999)
Internal usage only.
DisplayName: String (0, 255)
The display name of the remote participant.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API
xConfiguration
xCommand
xCommand
GPIO commands
xCommand GPIO ManualState Set
Requires user role: ADMIN, USER
USAGE:
xCommand GPIO ManualState Set [Pin1: Pin1] [Pin2: Pin2] [Pin3: Pin3] [Pin4: Pin4]
where
Pin1: High/Low
Pin2: High/Low
Pin3: High/Low
Pin4: High/Low
133
API Reference Guide
xStatus
Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.