Xconfiguration Cameras Camera [1..7] Whitebalance Level; Xconfiguration Cameras Preset Triggerautofocus; Xconfiguration Cameras Speakertrack Mode; Xconfiguration Cameras Speakertrack Closeup - Cisco MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xConfiguration Cameras Camera [1..7] Whitebalance Level

Define the white balance level. Requires the Cameras Camera [n] Whitebalance Mode to be set
to manual.
Requires user role: ADMIN, INTEGRATOR
Default value: 1
USAGE:
xConfiguration Cameras Camera n
where
n
: Unique ID that identifies the camera. Range: 1..7
Level
: Integer (1..16)
The white balance level.

xConfiguration Cameras Preset TriggerAutofocus

The current position (pan and tilt), zoom and focus are stored with a preset. Use this setting to
determine if the camera should refocus or use the focus value that is stored with the preset.
Requires user role: ADMIN
Default value: Auto
USAGE:
xConfiguration Cameras Preset TriggerAutofocus:
where
TriggerAutofocus
: Auto/Off/On
Auto: Whether the camera refocuses or not when selecting a preset, depends on the
camera type.
Off: The focus value that is stored with the preset will be used. The camera will not
refocus when selecting a preset.
On: The camera will refocus when selecting a preset. The focus value that is stored with
the preset may be overridden.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xConfiguration
Whitebalance Level: Level
TriggerAutofocus
xCommand

xConfiguration Cameras SpeakerTrack Mode

This setting applies only to systems with dual cameras.
The dual camera assembly consists of two cameras and uses an audio tracking technique that
finds and captures a close-up of the active speaker. When a change of speaker is detected, the
system can switch automatically between the two cameras to always show the best camera
view. Refer to the Cameras SpeakerTrack TrackingMode setting for different switching modes.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
USAGE:
xConfiguration Cameras SpeakerTrack Mode:
where
Mode
: Auto/Off
Auto: Speaker tracking is switched on. The system will detect people in the room and
automatically select the best camera framing. Users can switch speaker track on or off
instantly in the camera control panel on the Touch controller.
Off: Speaker tracking is switched off, and the two cameras operate as individual
cameras.

xConfiguration Cameras SpeakerTrack Closeup

This setting applies only when the Cameras SpeakerTrack Mode is set to Auto.
When a person in the room speaks the system will find the person and select the best camera
framing. This is called a closeup and may not include all the persons in the room. If you
want all the persons in the room to be in the picture at all times you can turn off the closeup
functionality.
Requires user role: ADMIN, INTEGRATOR, USER
Default value: Auto
USAGE:
xConfiguration Cameras SpeakerTrack Closeup:
where
Closeup
: Auto/Off
Auto: The system will zoom in on the person speaking.
Off: The system will keep all the persons in the room in the camera framing at all times.
55
API Reference Guide
xStatus Appendices
Mode
Closeup
Copyright © 2017 Cisco Systems, Inc. All rights reserved.