Cisco TelePresence MX700 and MX800
Introduction
About disconnect cause types
The following parameters are logged when a call is
disconnected. The disconnect cause types are used in
disconnect events (xEvent).
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API
xConfiguration
CauseValue
CauseType
CauseString
CauseCode
CauseOrigin
Example:
xEvent DisconnectEvent
*e CallDisconnect CauseValue: 1
CauseType: "LocalDisconnect"
CauseString: ""
OrigCallDirection: "outgoing"
RemoteURI: "firstname.lastname@company.com"
CallId: 89
CauseCode: 0
CauseOrigin: SIP
** end
xCommand
Proprietary. We recomend the use of CauseType and CauseCode.
Describes why the call was disconnected. The value space is { OtherLocal, LocalDisconnect,
UnknownRemoteSite, LocalBusy, LocalReject, InsufficientSecurity, OtherRemote, RemoteDisconnect,
RemoteBusy, RemoteRejected, RemoteNoAnswer, CallForwarded, NetworkRejected }
Describes the Cause Code.
The disconnect Cause Codes are defined in SIP and Q.850.
SIP, Q.850, internal.
239
API Reference Guide
xStatus
Appendices
Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.