Cameras Configuration; Xconfiguration Cameras Camera [1] Backlight Defaultmode; Xconfiguration Cameras Camera [1] Brightness Mode; Xconfiguration Cameras Camera [1] Brightness Defaultlevel - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction

Cameras configuration

xConfiguration Cameras Camera [1] Backlight DefaultMode

This configuration turns backlight compensation on or off. Backlight compensation is useful
when there is much light behind the persons in the room. Without compensation the persons
will easily appear very dark to the far end.
Requires user role: ADMIN, INTEGRATOR
Default value: Off
USAGE:
xConfiguration Cameras Camera n
where
: Unique ID that identifies the camera. Range: 1..1
n
: Off/On
DefaultMode
Off: Turn off the camera backlight compensation.
On: Turn on the camera backlight compensation.

xConfiguration Cameras Camera [1] Brightness Mode

Define the camera brightness mode.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
USAGE:
xConfiguration Cameras Camera n
where
: Unique ID that identifies the camera. Range: 1..1
n
: Auto/Manual
Mode
Auto: The camera brightness is automatically set by the system.
Manual: Enable manual control of the camera brightness. The brightness level is set
using the Cameras Camera [n] Brightness DefaultLevel setting.
Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017.
D15333.07
About the API xConfiguration xConfiguration
Backlight DefaultMode: DefaultMode
Brightness Mode: Mode
xCommand

xConfiguration Cameras Camera [1] Brightness DefaultLevel

Define the brightness level. Requires the Cameras Camera [n] Brightness Mode to be set to
Manual.
Requires user role: ADMIN, INTEGRATOR
Default value: 20
USAGE:
xConfiguration Cameras Camera
where
: Unique ID that identifies the camera. Range: 1..1
n
: Integer (1..31)
DefaultLevel
The brightness level.

xConfiguration Cameras Camera [1] Flip

With Flip mode (vertical flip) you can flip the image upside down. Flipping applies both to the
self-view and the video that is transmitted to the far end.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
USAGE:
xConfiguration Cameras Camera
where
: Unique ID that identifies the camera. Range: 1..1
n
: Auto
Flip
Auto: If the camera detects that it is mounted upside down, the image is automatically
flipped.
37
API Reference Guide
xStatus Appendices
n Brightness DefaultLevel: DefaultLevel
n Flip: Flip
Copyright © 2017 Cisco Systems, Inc. All rights reserved.