Connect Power - Honeywell Thor VM3 User Manual

1. Secure the cable to the bracket with plastic tie straps (cable ties).
2. If necessary, the cable ties can be trimmed to length after installation. Cut the

Connect Power

See
For the VM1D Standard Dock and VM3D Enhanced Dock, power options include:
•
•
•
•
•
•
•
For the VMXD Enhanced Dock, power options include:
•
When using the Thor VM3 with AC power, use the VMXD Enhanced Dock for Off-Vehi-
cle Use and:
•
74
excess tie length off flush and not at an angle to prevent sharp edges that may
cause cuts.
Power Supply Connector
12-48 VDC Vehicles (10-60 VDC Direct Connection)
power.
60-144 VDC Vehicles (50-150 VDC Power Supply, Screws on Side of Lid)
the use of a DC/DC power supply.
60-144 VDC Vehicles (50-150 VDC Power Supply, Screws on Top of Lid)
use of a DC/DC power supply.
VX6 / VX7 Adapter Cable
installed VX6 or VX7.
Thor VX8 / Thor VX9 Adapter Cable
VM1D Standard Dock or VM3D Enhanced dock (replaces a previously installed Thor
VX8 or Thor VX9.
CV61 Adapter Cable
installed CV61.
Screen Blanking - Optional connection to blank the Thor VM3 display while the
vehicle is in motion.
VMXD Enhanced Dock with Thor VX8/Thor VX9 Power Cable
a Thor VM3 (with a VMXD Enhanced Dock) replaces a previously installed Thor VX8
or Thor VX9.
External AC/DC Power Supply
Thor VM3, such as in an office environment.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
for connector pinout
- For applications where the Thor VM3 replaces a previously
- For applications where the Thor VM3 (with a
- For applications where the Thor VM3 replaces a previously
- For use when DC power is not available to power the
- Direct connection to vehicle
- Requires
- Requires the
- For applications where