Options - Honeywell Thor VM3 User Manual

Options

Start > Settings > Control Panel > Options
It may be necessary to warmboot the Thor VM3 after making desired changes. A pop up
window indicates if a warmboot is required.
Communication
Options on this tab configure communication options for the Thor VM3.
Allow Remote Desktop Autologon
By default, Remote Desktop Autologon is disabled. Check this checkbox to enable
Remote Desktop Autologon.
Note: The .RDP file must be saved in the \System folder. When prompted, use the Save As button
to save the .RDP file is the \System directory. If the .RDP file is saved in the default root
folder location, the .RDP file will not persist across a warmboot.
Autolaunch TimeSync
By default, TimeSync does not automatically run on the Thor VM3. To enable TimeSync
to run automatically on the Thor VM3, check this checkbox.
Synchronize with a Local Time Server
By default, GrabTime synchronizes via an Internet connection. To synchronize with a
local time server:
1. Use ActiveSync (or a USB thumb drive) to copy GrabTime.ini from the My Device >
2. Edit the copy of GrabTime.ini on the host PC. Add the local time server's domain
3. Copy the modified GrabTime.ini file to the My Device > System folder on the mobile
The System/GrabTime.ini file takes precedence over the Windows/GrabTime.ini file.
System/Grabtime.ini also persists after a coldboot; Windows/Grabtime.ini does not
persist.
186
Windows folder on the mobile device to the host PC.
name to the beginning of the list of servers. You can optionally delete the remainder
of the list.
device.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide