Honeywell Thor VM3 User Manual page 258

LEAP
To configure for Cisco LEAP:
1. Set Security Type to WPA2-Enterprise or CCKM.
2. Set Encryption Type to AES.
3. Set network authentication method to CISCO-LEAP.
4. Tap the Settings button.
5. Select the desired credentials method of providing credentials. Prompt
6. If saved username and password is selected, enter the credentials now.
7. The About tab provides Cisco copyright information.
8. Tap OK to close all open windows.
246
automatically for username and password is recommended.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide