Setup Terminal Emulation Parameters; Cleaning; Cleaning The Thor Vm3 And The Dock; Cleaning The Touch Screen - Honeywell Thor VM3 User Manual

Setup Terminal Emulation Parameters

The Thor VM3 offers both RFTerm and Enterprise TE. For details on configuring these
terminal emulators, refer to the appropriate user's guide at www.honeywellaidc.com.

Cleaning

Cleaning the Thor VM3 and the Dock

Dampen a cloth with the cleaner and then wipe the surface. Do not spray the cleaner
directly onto the Thor VM3 or the dock. Avoid harsh chemicals. The following cleaners
are recommended:
•
•
•
•

Cleaning the Touch Screen

Note: These instructions are for components made of glass. If there is a removable protective
film sheet on the display, remove the film sheet before cleaning the screen.
Keep rough or sharp objects away from the Thor VM3 touch screen and, if installed, the
bar code reader scanning aperture.
If the glass becomes soiled or smudged, clean only with a standard household cleaner
such as Windex® without vinegar or use isopropyl alcohol. Dampen the cloth with the
cleaner and then wipe the surface.
Do not use paper towels or harsh-chemical-based cleaning fluids since they may result
in damage to the glass surface. Use a clean, damp, lint-free cloth.
Do not scrub optical surfaces. If possible, clean only those areas which are soiled. Lint
and particulates can be removed with clean, filtered canned air.

Startup Help

Contact
Thor VM3 seems to lockup as
soon as it is rebooted.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Windex® Glass Cleaner
Formula 409® All-Purpose Cleaner or Glass and Surface Cleaner
Fantastik® All Purpose Cleaner
Liquid hand soap
Technical Assistance if you need more help.
There may be slight delays while the wireless client connects to the
network, authorization for voice-enabled applications complete, and
Bluetooth relationships establish or re-establish.
When an application begins, the Thor VM3 is ready for use.
23