Install Msata Drive; Equipment Required; Installation Procedure - Honeywell Thor VM3 User Manual

Install mSATA Drive

Note: Install SIM Card(s)
An mSATA card slot is provided for storage expansion.
•
•

Equipment Required

The following equipment is user-supplied:
•
•

Installation Procedure

Note: Install any SIM cards before installing the mSATA drive.
1. Place the Thor VM3 in Suspend by pressing the Power button.
2. Remove the Thor VM3 from the
3.
4. Place the Thor VM3 face down on
5. Use a #2 Phillips bit to loosen the
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
before installing the mSATA drive.
Only mSATA drives with pin 43 not connected are supported.
Connecting an mSATA drive with connector pin 43 grounded can result
in system instability such as a failure to boot or non-functional
accessories such as keyboard or mouse.
Torquing tool capable of measuring inch pounds
mSATA card
dock.
Disconnect UPS Battery.
a stable surface.
captive M3 screws on the access
panel with the mSATA and SIM
labels. This panel is on the right
hand side when the Thor VM3 is
face down with the top away from
the user.
125