Honeywell Thor VM3 User Manual page 131

Typical Installation
Vehicle Safety Cage
Mounting Instructions
1. Attach and secure the desired mounting bracket to the highest point on the safety
2. Attach the female connector of the coaxial cable to the antenna connector on the
3. Secure the whip antenna to the mounting bracket.
4. Connect the antenna cable to the whip antenna.
5. Use cable ties to secure the coaxial cable to the vehicle as necessary. Make sure the
6. Connect the cable to the antenna connector (Wi-Fi Main or Wi-Fi Aux) on the Thor
7. Repeat the steps above for the second 802.11 antenna.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Antenna
cage, following these precautions:
• The plate must be mounted so the antenna is not damaged while the vehicle or
any of its parts are moving.
• The antenna mounting portion of the bracket must be parallel to the floor.
• If using two antennas, they must be mounted at least 12 inches (304.8mm) apart.
vehicle mounted Thor VM3.
cable is routed so it is not damaged by any moving parts of the vehicle.
VM3. If only one antenna is used, be sure to connect it to the Wi-Fi Main connector.
Mounting Bracket
Cable Vehicle Mounted
Computer
119