Disconnect Ups Battery; Equipment Required; Disconnect Procedure - Honeywell Thor VM3 User Manual

Disconnect UPS Battery

Caution: The UPS battery must be disconnected before you ship the Thor

Equipment Required

The following equipment is user-supplied:
•
•

Disconnect Procedure

1. For convenience, the Thor VM3 can be removed from the dock, though it is not nec-
2. If the Thor VM3 remains in the
3. Place the Thor VM3 in Suspend by
4. Place the Thor VM3 face down on
5. Use a #2 Phillips bit to loosen the
6. Locate the small push button
7. Press the push button to disconnect the UPS. The UPS battery
8. Reattach the access panel, torquing the M3 screws to 7.0 ± 0.5 inch
9. When the Thor VM3 is attached to external power, the UPS battery
10. Restart the Thor VM3
124
VM3 or Replace Front
Torquing tool capable of measuring inch pounds
#2 Phillips screwdriver bit
essary.
dock, disconnect the power cable
from the dock.
pressing the Power button.
a stable surface.
captive M3 screws on the access
panel with the mSATA and SIM
labels.
located just below the SIM card installation slot.
maintains its charge but is disconnected from the power circuitry of
the Thor VM3.
pounds using a #2 Phillips bit.
is automatically reconnected.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Panel.