Network Capture - Honeywell Thor VM3 User Manual

Network Capture

Start > Settings > Control Panel > Network Capture
Note: Verify the
The Network Capture panels provide configuration options for logging utilities. Two
types of logging are configurable:
•
•
Factory Default Settings
Netlog
Command
pkt_size in bytes
cap_size in bytes
.cap file
Promiscuous Mode
NDISLog
Command
file
Netlog
Use this control panel to configure the Netlog utility. By configuring Netlog using the
control panel, Netlog remains running across a warmboot. However, please note that:
•
•
•
•
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Date / Time before using the logging utilities to ensure meaningful data.
Netlog is a Windows utility that monitors network traffic. Netlog creates a .CAP file
that can be read using Microsoft Windows Network Monitor or any compatible tool
that supports .CAP files.
NDISLog monitors the NDIS interface between the WLAN radio and the NDIS driver.
This utility creates a .TXT log file.
Netlog first stores data to a file named netlog0.cap, then netlog1.cap. Any time the
current file reaches maximum size, Netlog switches to the other file.
If the log file is stored in the root directory, any previous data is lost and a new log file
started after the warmboot
If the log file is stored in \System, all previous data is saved across the warmboot.
If Netlog is enabled across the warmboot, a series of brief popups may be displayed
during the boot cycle. No user interaction is required.
options
5000
500000
\netlog
Disabled
stop
\ndislog.txt
183