Peripherals - Honeywell Thor VM3 User Manual

Peripherals

Start > Settings > Control Panel > Peripherals
This panel is used to enable and disable the touch screen defroster.
Factory Default Settings
Defroster
Defroster
Defroster Trip Point
Defroster
Note: Settings have no effect if the defroster is not installed.
The screen displays the information about the defroster:
•
•
•
•
Tap the Test button to determine the presence of the defroster. Use this button when the
front panel of the Thor VM3 has been swapped. For example, if the Thor VM3 did not
contain a defroster but a new front panel with a defroster is installed, tap the Test but-
ton to update the defroster presence status on this tab.
If a defroster is installed, the defroster can be switched between the Enabled and Dis-
abled states using the radio buttons on this tab. The default is Enabled.
Specify the Defroster trip point. The default trip point is 40º C (104º F).
194
If the defroster is installed
The current state of the defroster, ON or OFF
If the defroster is Enabled or Disabled
The defroster trip point.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Enabled (if installed)
40º C (104º F)