Screen Control - Honeywell Thor VM3 User Manual

Screen Control

Start > Settings > Control Panel > Screen Control
Set screen properties for the Thor VM3.
Factory Default Settings
Current Level
LCD Brightness (%)
Ambient Light (%)
Automatic Brightness Control
Automatic brightness control is only available on a Thor VM3 with
an outdoor display.
Enable automatic
brightness control
Low to medium light level
(%)
Medium to high light level
(%)
Note: If Automatic Brightness Control is enabled for an outdoor display, the value for LCD
Brightness depends on the Ambient Light %. Otherwise, the display defaults to 100%
brightness.
Note: There is no default value for Ambient Light % as it varies depending on the level of light
where the Thor VM3 is located. If the Thor VM3 has an indoor display it does not have an
ambient light sensor and the Ambient Light % is always 0.
Note: Touch screen defroster controls are located on the
Current Level
LCD brightness displays the current LCD brightness level. The default brightness is
100%.
204
100 (see note)
(see note)
Disabled
25
75
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Peripherals control panel.