Honeywell Thor VM3 User Manual page 181

Vehicle-mount rugged pc with microsoft windows embedded compact 7.0
Hide thumbs Also See for Thor VM3:
Table of Contents

Advertisement

License Manager
About
License Vault
Bar Code Scanners and Enterprise Settings
The following types of bar code scanners are supported on the Thor VM3:
Note: USB scanners are not supported by or configured through Enterprise Settings. See
Scanners.
The scanner symbologies can be updated through Enterprise data collection software.
Serial Scanners
To configure a particular scanner to work with Enterprise data collection software,
select Start > Control Panel > Enterprise Settings > Data Collection > Tethered Scanner >
Tethered Scanner (COM1) or (COM2) > Scanner Settings.
Select the appropriate scanner model (SR Intermec Scanner, ASCII, SR60). By default,
both COM1 and COM2 are opened so the appropriate scanners (see below) can work
without changing factory defaults:
Tethered Scanner (COM1)
By default the Scanner Model is set to SR Intermec Scanner, which covers models such
as SR61T, SR30, and SR31.
Tethered Scanner (COM2)
By default the Scanner Model is set to ASCII to connect with a scanner with baud rate of
9600, 8 data bits, no parity, 1 stopbit, and no flow control.
Bluetooth Scanners
See
Always use Enterprise Settings to configure Bluetooth parameters. Do not use the Blue-
tooth configuration options available from the Bluetooth icon in the system tray.
USB Scanners
When a HID enabled USB scanner is connected to the Thor VM3 the scanned data is
transmitted to the active windows as keystroke messages. Any data handling to be
applied to the scanned data (for example to strip leading or trailing characters) must be
programmed into the scan engine. This is done by scanning configuration bar codes
from the scanner manufacturer or handled by the application accepting the data. Note
that Enterprise Settings data collection does not support USB Scanners.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
A tethered scanner connected to COM1 or COM2
A wireless scanner connected via Bluetooth
Bluetooth Scanning
Parameters
Information on License Vault
None (displays applications that are licensed)
for information on connecting Bluetooth scanners.
USB
169

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents