Honeywell Thor VM3 User Manual page 208

•
•
•
•
Because of the cumulative effect, if the Thor VM3 is operating from the UPS, for exam-
ple:
•
•
•
•
•
196
Ignition Control/Ignition On - When either Ignition Control option has been selected
for the Power Configuration mode and the Ignition Switch is On, this Power Scheme
is selected. Because of the presence of external power, this Power Scheme has longer
timeout values.
Ignition Control/Ignition Off - When either Ignition Control option has been selected
for the Power Configuration mode and the Ignition Switch is Off, this Power Scheme
is selected. This Power Scheme has shorter timeout values (compared to Ignition On)
to preserve the vehicle battery.
Auto-On - When Auto-On has been selected for the Power Configuration mode, this
Power Scheme is selected. Because of the presence of external power, this Power
Scheme has longer timeout values.
UPS - When any Power Configuration Mode is selected but no external power is
present, the UPS Power Scheme is used. This Power Scheme has much shorter
timeout values designed to shut down the Thor VM3 before the UPS battery is
depleted.
The backlight turns off after 30 seconds of no activity,
The display turns off after 1 minute and 30 seconds of no activity (30 sec + 1 min),
The Thor VM3 enters Suspend after 11 minutes and 30 seconds of no activity.
The Thor VM3 shuts down after 31 minutes and 30 seconds of no activity.
If the User Idle timer is set to Never, the power scheme timers never place the Thor
VM3 in User Idle, System Idle or Suspend modes.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide