Prepare For Vehicle Mounting; Quick Start - Honeywell Thor VM3 User Manual

Overhead, dash and roof support pillar mounting is via a RAM Mount or U-bracket
accessory which includes all the hardware required for vehicle mounting.
Never put the Thor VM3 into the vehicle mounted assembly until the assembly is
securely fastened to the vehicle.

Prepare for Vehicle Mounting

The Thor VM3 should be secured to an area in the vehicle where it:
•
•
•
•

Quick Start

The following list outlines, in a general way, the process to follow when mounting the
Thor VM3 in a vehicle. Refer to the following sections in this document for more details.
1.
2.
3. Secure accessories such as an optional external keyboard or a scanner holder to
4. Adjust the Thor VM3 to the best viewing angle.
5.
6.
7. Connect vehicle power:
8. Secure all cables in
The Thor VM3 is ready for use.
52
Does not obstruct the driver's vision or safe vehicle operation.
Will be protected from rain or inclement weather.
Will be protected from extremely high concentrations of dust or wind-blown debris.
Can be easily accessed by a user seated in the driver's seat while the vehicle is not in
operation.
Install RAM Mount or
Place Thor VM3 in the
either an integrated or remote mounting bracket.
Install Remote Antenna
Connect Cables for any peripherals.
• 12-48 VDC Vehicles (10-60 VDC Direct Connection)
• 60-144 VDC Vehicles (50-150 VDC Power Supply, Screws on Top of Lid)
• 60-144 VDC Vehicles (50-150 VDC Power Supply, Screws on Side of
• Thor VX8 / Thor VX9 Adapter Cable
• VX6 / VX7 Adapter Cable
Strain Relief Cable
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Install U Bracket Mount
Dock.
or Install External Antenna
Clamps.
to the vehicle.
if necessary.
Lid).