Zoomzone - Honeywell Thor VM3 User Manual

ZoomZone

Start > Settings > Control Panel > ZoomZone
ZoomZone can be used to configure screen blanking behavior.
Motion Detection Action
Determine what to do when motion is detected:
•
•
•
•
Motion Detection Method
Select the motion detection method.
The Thor VM3 supports the screen blanking box to determine motion. Select the port
(COM1 or COM2) to which the blanking box is attached.
Note: By default, COM1 and COM2 ports are used by Enterprise Data Collection. To use a COM
port for screen blanking, access
Scanners > Tethered Scanner (COMx) - Enable Scanner Port to off (where COMx is either
COM1 or COM2).
Motion Timeout Settings
Screen blanking can be configured to provide delays.
•
212
Display Always Active - The display does not change when motion is detected.
Display Black - The display is blacked out when motion is detected.
Display freeze - The display is frozen at the time motion is detected.
Use Zoom Area - A preconfigured zoom area is displayed when motion is detected.
Delay on Motion - Configure the delay between motion detection and screen
blanking. The default is 2 seconds.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Enterprise Settings and set Data Collection > Tethered