Honeywell Thor VM3 User Manual page 288

Connection Type
Use this tab to configure the connection parameters. The tab is identified by the type of
connection, i.e.: UMTS, LTE, UDMA, etc. The label on this tab corresponds to the Tech-
nology field on the
Note that the SIM card being configured (Sim1 or Sim2) is identified at the top of this
tab.
If the WWAN radio fails to connect, please check that the correct APN is
entered. This entry can be verified by contacting the WWAN carrier.
An APN mismatch may generate an error message, however this is not
always the case. The first step in diagnosing a connection error should be to
verify the APN.
After all entries are completed, tap the Save button.
276
About tab.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide