Honeywell Thor VM3 User Manual page 143

6. Carefully lift the front panel away from the device.
7. Position the replacement front panel so wiring connector on the back of the front
8. Gently press the front panel into place.
9. Tighten the sixteen (16) captive M3 screws. In the order shown in the top figure
10. Reinstall the Thor VM3 in the dock.
11. When the Thor VM3 is placed in the powered dock, the UPS battery automatically
12. Restart the Thor VM3.
13. If adding or removing a defroster, update the Thor VM3 configuration by selecting
14. Close any open control panel windows.
15. Perform a touch screen Calibration.
16. The Thor VM3 is ready for use.
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Wiring Connector
on Thor VM3
panel lines up with the connector on the Thor VM3.
above, use a #2 Phillips bit and torque the screws to 7 ± 0.5 inch pounds.
reconnects.
Start > Settings > Control Panel > Peripherals and tap the Test button.
Wiring Connector
on Front Panel
131