Vm3D Enhanced Dock - Honeywell Thor VM3 User Manual

VM3D Enhanced Dock

Caution: This dock is designed for DC power vehicle-mounted
SKU
Power Connector
COM1Connector
COM2 Connector
CANBUS/AUDIO Connector
USB1 Connector
USB 2 Connector
USB2 Connector
USB Host Connector
Ethernet
Power Switch
Input Power
External Power Supply
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
applications only.
VM3001VMCRADLE
6-pin connector:
Direct10-60V DC input power
Optional external converter for extended range DC (60-150 VDC)
9-pin male, RS-232 serial port, COM1 with switchable power on pin 9
9-pin male, RS-232 serial port, COM2 with switchable power on pin 9
15-pin male, CANbus/Audio connector supports either audio/microphone via adapter cable or
J1939 Female and J1939 Male connectors via CANbus cable
9-pin female, USB connector supports USB host port via adapter cable
Note: USB Client port may not be supported by the Thor VM3 operating system.
15-pin female, USB connector supports 2 USB host ports via adapter cable
15-pin female, USB connector supports two USB host ports via adapter cable
One USB Host connector behind waterproof cap
One RJ45 Ethernet connector behind waterproof cap
Sealed power switch
DC Input Voltage: 10- 60 VDC,
Input Current: 4.6 Amps (typical),
Input Fuse: 8A Time Delay. Replace with same size, rating and type of fuse:
• Littelfuse 0215008.MXP
• Cooper Bussmann BK1/S506-8-R
• Bel Fuse 5HT 8-R
or equivalent.
50-150 VDC DC power supply available for vehicles over 60 VDC
Note: Use dock VMX005VMCRADLE (VMXD Enhanced Dock of Off-Vehicle Use) in AC power
applications.
297