Maintenance - Vehicle Mounted Devices; Cleaning; Place Thor Vm3 In The Dock - Honeywell Thor VM3 User Manual

Maintenance - Vehicle Mounted Devices

Check the vehicle mounting hardware frequently and re-tighten if necessary.
If the vehicle mounting hardware and connections become broken, loose or cracked,
the assembly must be taken out of service and replaced. Contact
for help.

Cleaning

If it becomes necessary to clean the Thor VM3, dock, peripherals or mounting hardware
see:
•
•

Place Thor VM3 in the Dock

1. Locate the notch on the upper rear of the Thor VM3.
2. Slide this notch over the top lip of the dock. Slide the Thor VM3 from side to side on
3. Pull the quick release lever on the Thor VM3 down and push the Thor VM3 against
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Cleaning the Thor VM3 and the Dock
Cleaning the Touch Screen
Back of Thor VM3
Release Lever
the dock to make sure it fully engages on the lip of the dock. If the Thor VM3 cannot
be slid side to side, the lip is engaged.
the dock.
Lower Lip on Dock
Notch on
Thor VM3
Technical Assistance
Front of Dock
Upper Lip on Dock
53