Honeywell Thor VM3 User Manual page 287

4. Tap anywhere else on the screen to exit the editing mode.
5. The values that can be changed are:
To configure a WWAN network, tap the View Network Settings button. To configure the
WLAN connection use the
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
• Threshold - The signal strength (in dBm) before roaming can occur to this
connection. The default is -93 dBm.
• Dwell - The length of time (in seconds) to wait before attempting the connection.
The default is 10 seconds.
• Connect Attempts - The number of times this connection is tried. If there is no
successful connection after this many tries, the next connection is tried.
WLAN Wireless Configuration Utility (WCU).
275