Turn Power On/Off - Honeywell CK65LON Quick Start Manual

Charge the Mobile Computer
The CK65 mobile computer ships with a partially charged
battery. Charge the battery with a CK3 Series charging device for
a minimum of 4 hours. Using the computer while charging the
battery increases the time required to reach a full charge.
We recommend the use of Honeywell accessories and
power adapters. Use of any non-Honeywell
accessories or power adapters may cause damage not
covered by the warranty.
CK65 mobile computers are designed for use with CK3 Series
charging accessories.
Ensure all components are dry prior to mating the
computers and batteries with peripheral devices.
Mating wet components may cause damage not
covered by the warranty.

Turn Power On/Off

The first time you power on the computer, a Welcome screen
appears. You can either scan a configuration barcode or use the
Wizard to manually set up the computer. Once setup is
complete, the Welcome screen no longer appears on startup
and Provisioning mode is automatically turned off (disabled).
To turn the computer on:
• Press and hold the Power button for approximately 3 seconds,
and then release.
To turn the computer off:
1. Press and hold the Power button until the options menu
appears.
2. Touch Power off.
7