Table of Contents
Advertisement
About Wi-Fi Staging
Overview
You can use the Honeywell Wi-Fi Staging app to quickly set up new devices by
configuring one device and using it to stage others. Wi-Fi Staging can also be used
to enroll devices in an Mobile Device Management (MDM) system by connecting
units to a specified network and downloading and installing the specified MDM
client app.
Once you have set up a configuration in the Wi-Fi Staging app on the server device,
Wi-Fi staging will use that device as a hotspot and wait for a client to connect to it.
The configuration will be distributed to the client device once communication is
established between the client and the server device.
Staging Devices
Wi-Fi Staging requires two steps:
1. Setting up a master device to act as a server (see next section).
2. Setting up the client device (see
Set Up a Device as a Server
Wi-Fi Staging provides two kinds of configurations for a master device acting as a
server through a hotspot. Setup of the server device will differ based on the staging
configuration your choose:
•
•
Dolphin CT40 Mobile Computer
Basic Configs include the most common system settings:
•
System language
•
Bluetooth and NFC
•
System volume
•
Location
•
Network
•
File download
•
Application installation or launch
Advanced Configs allow you to stage your devices with .xml files
Set Up Client Devices
on page 78).
75
Advertisement
Table of Contents
