Xconfiguration Cameras Speakertrack Connectordetection Mode; Xconfiguration Cameras Speakertrack Connectordetection Cameraleft; Xconfiguration Cameras Speakertrack Connectordetection Cameraright; Xconfiguration Cameras Speakertrack Whiteboard Mode - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80

Introduction

xConfiguration Cameras SpeakerTrack ConnectorDetection Mode

This setting applies only when a Cisco TelePresence SpeakerTrack 60 camera is connected to
the codec (video system).
Define whether to automatically detect or manually configure which video input each individual
camera is connected to. You should choose manual configuration in situations where the codec
does not receive EDID information from the cameras. Typically, this will be when you use HDMI
repeaters that do not pass on EDID information.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
USAGE:
xConfiguration Cameras SpeakerTrack ConnectorDetection Mode:
where
: Auto/Manual
Mode
Auto: Automatically detect which video inputs the cameras are connected to.
Manual: Manually define which video inputs the cameras are connected to. Use the
Cameras SpeakerTrack ConnectorDetection CameraLeft and Cameras SpeakerTrack
ConnectorDetection CameraRight settings.

xConfiguration Cameras SpeakerTrack ConnectorDetection CameraLeft

This setting applies only when a Cisco TelePresence SpeakerTrack 60 camera is connected
to the codec (video system). Furthermore, Cameras SpeakerTrack ConnectorDetection Mode
must be set to Manual.
Define the number of the video input that SpeakerTrack 60's left camera is connected to.
Requires user role: ADMIN, INTEGRATOR
Default value: 1
USAGE:
xConfiguration Cameras SpeakerTrack ConnectorDetection CameraLeft:
where
: Integer (1..5)
CameraLeft
Set a valid video input number. For example, set to 1 if the left camera is connected to
video input 1.
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xConfiguration
Mode
xCommand

xConfiguration Cameras SpeakerTrack ConnectorDetection CameraRight

This setting applies only when a Cisco TelePresence SpeakerTrack 60 camera is connected
to the codec (video system). Furthermore, Cameras SpeakerTrack ConnectorDetection Mode
must be set to Manual.
Define the number of the video input that SpeakerTrack 60's right camera is connected to.
Requires user role: ADMIN, INTEGRATOR
Default value: 2
USAGE:
xConfiguration Cameras SpeakerTrack ConnectorDetection CameraRight:
where
: Integer (1..5)
CameraRight
Set a valid video input number. For example, set to 2 if the right camera is connected to
video input 2.

xConfiguration Cameras SpeakerTrack Whiteboard Mode

This setting applies only when a Cisco TelePresence SpeakerTrack 60 camera is connected to
the codec.
Define whether to enable the Snap to Whiteboard feature or not.
The Snap to Whiteboard feature relies on a speaker track camera. When a presenter is stand-
ing next to the whiteboard, the camera will capture both the presenter and the whiteboard if
the Snap to Whiteboard feature is enabled. If the feature is disabled, only the presenter will be
captured.
The Snap to Whiteboard feature is set up from the Touch controller.
Note: Not supported in software version CE9.0.
Requires user role: ADMIN, INTEGRATOR
Default value: Off
USAGE:
CameraLeft
xConfiguration Cameras SpeakerTrack Whiteboard Mode:
where
: Off/On
Mode
Off: The Snap to Whiteboard feature is disabled.
On: The Snap to Whiteboard feature is enabled.
47
API Reference Guide
xStatus Appendices
CameraRight
Mode
Copyright © 2017 Cisco Systems, Inc. All rights reserved.