Cisco TelePresence SX80 Reference Manual page 207

Cisco TelePresence SX80

Introduction
UserInterface status
xStatus UserInterface ContactInfo ContactMethod [n] Number
Returns the system's active contact information. This address is used to reach this endpoint.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus UserInterface ContactInfo ContactMethod Number
*s UserInterface ContactInfo ContactMethod 1 Number: "12345678"
** end
xStatus UserInterface ContactInfo Name
Returns the system's active contact name. The result depends on which protocol, if any, the
system is registered on. The automatically set contact name may have been overridden with the
command xConfiguration UserInterface ContactInfo Type. This results in a diagnostics warning
about contact mismatch.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus UserInterface ContactInfo Name
*s UserInterface ContactInfo Name: "MySystem"
** end
xStatus UserInterface Extensions Widget [n] Value
Returns the value for a widget. Widgets are used in custom panels, for example in-room
controls, that are added to the user interface. The value space depends on the widget type.
The value is an empty string until a value is set with the UserInterface Extensions Widget
SetValue command.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
String
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xCommand
xStatus UserInterface Extensions Widget [n] WidgetId
Returns the unique identifier for a widget. Widgets are used in custom panels, for example
in-room controls, that are added to the user interface.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
String
207
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.